Product Details
OPEN's newest frame comes from the idea of winding detours, hence the name WI.DE. The OPEN WI.DE frameset goes a little bit further than the OPEN U.P., as it's set up more for extreme terrain. Conquer almost any terrain, without slowing you down on the easier roads and trails.
Here are the details: Take an U.P. frame, and massage it to fit a 27.5 x 2.4" or 700 x 46c tire without taking away too much from the bike's geometry. Add in a fourth cage mount under the bottom bracket, a 1.5 cm taller headtube, a slightly lower bottom bracket height, a new XS size, and boom, new bike that handles similarly to the U.P. but has different capabilities.
The WI.DE uses dropped chainstays on both sides to create the massive 2.4" tire clearance. OPEN says this actually increases bottom bracket stiffness, but we dig that this adds more tire clearance while maintaining the road bike-like 420 mm chainstays and maintaining similar geometry in sizes. Despite all of these changes, the new WI.DE weighs exactly the same as the U.P., at 1040 grams for a frame and 390 g for a fork.
We've also worked hard to create aggressively-priced build kits to help you build your ideal bike.
Have any questions about the OPEN WI.DE gravel bike? Give us a call during business hours, or send us an email any time to info@contenderbicycles.com.
XS | S | M | L | XL | |
rider height¹ | <5’5"" | 5’3""-5’7"" | 5’6""-5’11"" | 5’10""-6’3"" | 6’2""-6’8"" |
stack | 520 | 545 | 570 | 595 | 620 |
reach | 346 | 358 | 370 | 382 | 394 |
standover² | 707 | 739 | 777 | 794 | 817 |
headtube angle | 68.0° | 69.0° | 71.0° | 71.5° | 71.5° |
headtube length | 99 | 125 | 150 | 170 | 196 |
fork offset | 50 | 50 | 50 | 50 | 50 |
seattube length | 464 | 495 | 530 | 550 | 564 |
seattube angle | 72.5° | 72.5° | 72.5° | 72.5° | 72.5° |
seattube angle (norm.³) | 74.5° | 74.0° | 73.5° | 73.5° | 73.5° |
toptube length | 510 | 530 | 550 | 570 | 590 |
toptube length (norm.³) | 490 | 515 | 540 | 560 | 580 |
BB drop | 80 | 77 | 75 | 75 | 75 |
front center | 583 | 596 | 599 | 613 | 634 |
rear center | 420 | 420 | 420 | 420 | 420 |
wheelbase | 990 | 1004 | 1009 | 1022 | 1042 |
*Please note that bike specifications are subject to change without prior notice |
Frame-only size M, ±3% | 1040g |
Fork-only weight, ±3% | 390g |
Sizes | XS/S/M/L/XL |
Stock colors | Grey matte/gloss mix (assembled bike), Orange (frameset + parts kit), RTP (frameset + parts kit) |
RTP (Ready-to-paint) | A clearcoat is not needed for UV protection but recommended to protect against scratches and wear. Some customers leave the frame bare. |
BB standard | BB386EVO pressfit 86.5x46mm BB shell |
Recommended groupsets | The WIDE is designed for serious off-road riding. We recommend a rear derailleur with a clutch or cage damper (Shimano GRX 1x, SRAM Force AXS & Red AXS 1x, SRAM Apex1, Rival1, Force1, Campagnolo Ekar) |
Shimano crank fit | All road cranks |
SRAM crank fit | All DUB road, Force 1 BB30 |
Front derailleur mount | none, 1x drivetrains only |
Recommended ring shape | Flat (for example Wolftooth) |
Maximum 1x ring size | General guidance: 46t (flat ring, not available in all sizes with all BCDs so check with your crank supplier), 42t (SRAM offset ring). Note: clearance depends on chainline & chainring. 2mm space is required so please verify. |
Minimum 1x ring size | In standard set-up: 38t (flat & offset rings). Smaller rings can work depending on cassette/rear derailleur/chain length setup |
Rear thru-axle | 142x12mm superlight Carbon-Ti X-12 |
Front thru-axle | 100x12mm superlight Carbon-Ti X-12 |
Front disc rotor size | 160mm only |
Front brake caliper mount | Smartmount 160 system attaches flatmount caliper, without adaptor, for 160mm rotors |
Front brake bolts SRAM | 2x 37mm "REAR” brake bolts for 30mm “chainstay” (SRAM part# 00.5318.005.008) |
Front brake bolts Shimano | 2x 43.2mm “REAR” brake bolts for 30mm “chainstay” (Shimano part# Y8N208030) |
Front brake set-up Campagnolo | “140mm” (rear) caliper + 160mm rotor, no adaptors, 2x 39mm "screws for 30-34 mm rear mount thickness” (Campagnolo part# AC18-DBSC39) |
Rear disc rotor size | 160mm only |
Rear brake caliper mount | Smartmount 160 system attaches flatmount caliper, without adaptor, for 160mm rotors |
Rear brake bolts SRAM | 1x 27mm (SRAM part# 00.5318.005.004), 1x 32mm (SRAM part# 00.5318.005.006) |
Rear brake bolts Shimano | 1x 33.2mm (part# Y8N208010), 1x 38.2mm (part# Y8N208020) |
Rear brake set-up Campagnolo | “140mm” (rear) caliper +160mm rotor, no adaptors, 1x 29mm “screw for 20-24 mm rear mount thickness” (part# AC18-DBSC29), 1x 34mm “screws for 25-29 mm rear mount thickness" (part# AC18-DBSC34) |
MultiStop internal system | Mechanical 1x, Di2, eTap |
Headset | Integrated IS42/28.6 | IS52/40 |
Seatpost | 27.2mm diameter, standard set-up zero-offset |
Cage mounts | Seattube, downtube, under-downtube, under-BB |
TT bag mount system | 100mm front-post-to-headset-edge |